Rear End parts help needed

I know some of you guys know this stuff way better than I do (which is not at all) so maybe you can help me...

I was looking at an old Clear Image sale on ISSF. If this sale comes up again or I can get the same pricing I will get on it.

Here is a pic of what I have now, basically a rear end shell and axles...


I want to go with the True Trak and 4.10 gears like I had in the old car...what else do I need from this list, or what do I need that is not on this list? I put in bold the things I am thinking I need...let me know how I am doing... (Effing $1000!)

Item Description Price:

G001 3.42 Gears Yukon* $250.00 - $199.74
G002 3.73 Gears Yukon* $250.00 - $199.74
----- 4.56 Gears Yulon * $250.00 - $199.74
ABS Reluctor / 4.56 Bob Shirley
G004.5 ABS Reluctor / 373 $27.80 - $24.00
G005 Pinion Install Kit for Gears $60.00 - $55.00
G006 Large Journal Carrier Bearings & Adjustable Shims for Torsen
& Eaton (minimum requirements for installation of a posi) $70.00 - $64.00
G007 Large Journal Carrier Bearings $45.00 - $40.00
G008 Adjustable Shims $35.00 - $32.00
G009 Axle Bearings & Seals $45.00 - $38.00
D6001 Differential Additive (2 Bottles) $20.00 - $16.00
D6003 Eaton Posi (SuperBrute w/ 400# Springs) for Street & Strip Applications $485.00 - $415.00
D6004 (Timken)Master Overhaul Kit for Gears and Differential (Includes Pinion Kit, Large Journal Carrier Bearings & Adjustable Shims) $105.00 - $105.00
D6005 Tru-Trak Posi (worm gears) for Street & Autocross/Road Course Applications $405.00 - $389.00
D6006 Yukon Duragrip 8.5 30 spline Positraction $443.00 - $395.00

YA G26018080 Yukon axles for 91-96 8.5" GM Caprice & Impala; 30 3/8
inches long w/ 30 splines & 20 lbs. Yukon 1541H alloy hardended
axle shafts offer a strength increase over stock alloy. They are NHRA
certified, and 30% stronger than stock applications and come with a 5
year warranty. against manufacturing defects. $132.61 - $107.61



BTW: I am going LS1 with mild cam and T56, which is why I am thinking 4.10, let me know if you guys think I'm off on that.

Thanks,

Doug

I think you got it but add
4:10 ABS Reluctor
G009 Axle Bearings & Seals $45.00 - $38.00

a good DRIVESHAFT

I would go 4.56's for sure. 4.10's feel stock with a T56. I can drive through a parking lot in 1st in my car... If you want ABS, you're gonna have to get a reluctor from Bob Shirley too. I think they are about 100 bucks also.

Do you have the pinion yoke? Doesn't look like it in the pic. But you do have axles, so that's a plus.

And you'll need a diff cover. Any 10 bolt cover should work. I've got a 15 dollah summit chrome one.

The 410/456 reluctor from Bob Shirley is $132, i just talked to him about them. I hope you have better luck than me with Clear image, i got my 373 reluctor in 2 days, have called 3 times to find what the status of my crossmember is, and no luck. i'm not to happy about it, since he told me they were in stock and would ship the same day.

Yeah, well I'm still waiting for my posi and install kit that I ordered like 3 months ago that he sent to the wrong house.

mean ss wrote:

I think you got it but add
4:10 ABS Reluctor
G009 Axle Bearings & Seals $45.00 - $38.00

a good DRIVESHAFT

Thank you, I will update the list, and yes a good driveshaft will be on the list as well, but waiting for the motor/tranny install to be sure of length. The rear stuff I want to try to get pegged down now.

toomanytoyz wrote:

I would go 4.56's for sure. 4.10's feel stock with
a T56. I can drive through a parking lot in 1st in my car... If you
want ABS, you're gonna have to get a reluctor from Bob Shirley too. I
think they are about 100 bucks also.

Do you have the pinion yoke? Doesn't look like it in the pic. But you do have axles, so that's a plus.

And you'll need a diff cover. Any 10 bolt cover should work. I've got a 15 dollah summit chrome one.

Good advise on the 4.56, I want the feel my 4l60 had with 4.10 gears.

Is that saying that you have the summit one on your car or you have a spare? If a spare bring to my mod day, I'm sure I have something you need, or perhaps even some paper.

No Moa wrote:

The 410/456 reluctor from Bob Shirley is $132, i just talked to him about them. I hope you have better luck than me with Clear image, i got my 373 reluctor in 2 days, have called 3 times to find what the status of my crossmember is, and no luck. i'm not to happy about it, since he told me they were in stock and would ship the same day.

toomanytoyz wrote:

Yeah, well I'm still waiting for my posi and
install kit that I ordered like 3 months ago that he sent to the wrong
house.

Thanks for the info here, I was considering the cross member from them as well, but until both your issues are sorted out I will wait on everything, please let me know how it goes.

Doug

Sorry Doug, my cover is in use.

So if you want the feel of the 4l60 with the 4.10's, you'll want 4.56's or even 4.88's...

And Dan sucks at shipping. Even with help. He's gotten better though. And that's scary. He sent mine to my old house, where the guy is a total asshole and we may even have stirred up some legal issues cuz Dan can't follow directions. He is usually pretty good on the phone though. Email... not so much. I tried calling him last week and haven't heard back, so I'm guessing he may be on vacation or something. I will also be getting one of his crossmembers, too. But then I'm done dealing with him.

If you can get the parts from Summit or Jegs, I'd do that.

He's not on vacation bill, I talked to him weds ans Friday. He says the crossmembers ship from the fab guy, whomever that is.

No Moa wrote:

He's not on vacation bill, I talked to him weds ans Friday. He says the crossmembers ship from the fab guy, whomever that is.

fab guy "Bowtie Overdrives"

toomanytoyz wrote:

Sorry Doug, my cover is in use.

So if you want the feel of the 4l60 with the 4.10's, you'll want 4.56's or even 4.88's...

I will also be getting one of his crossmembers, too. But then I'm done dealing with him.

If you can get the parts from Summit or Jegs, I'd do that.

Good deal. FYI: someone, might have been Bobby, posted up the name of the joint that MAKES the Clear Image crossmembers, maybe we can get from them, cause I need one too and I have no interest in dealing with shady/long shipping because i work in mail order parts and I KNOW the things being posted here and at ISSF about Dan and Mike and all shitty business practices, there is no excuse for the kind of wait time people are seeing on items that they have already paid for. Backorder items should not be charged till they are ready to ship THAT DAY.

Sorry, I had a big response written on ISSF about Mike and Focustech and their "website" and "moving" delays that are absolutely bogus in this digital/internet age, but I decided it was not worth getting in a fight over when I have no vested interest in delayed parts.

Doug

mean ss wrote:

No Moa wrote:

He's not on vacation bill, I talked to him weds ans Friday. He says the crossmembers ship from the fab guy, whomever that is.

fab guy "Bowtie Overdrives"

Right on cue!

Not listed on their site, but I'm thinking an email saying that a few are needed due to poor CS at CI might spur a small direct buy??? Anyone else interested if I try?

Doug

see if mike can make them
http://www.impalassforum.com/vBulletin/showthread.php?t=233790

Pooge wrote:

Not listed on their site, but I'm thinking an email saying that a few are needed due to poor CS at CI might spur a small direct buy??? Anyone else interested if I try?

Doug

I'm in, as long as it's the most current one with the big humps to clear 3" exhausts...

toomanytoyz wrote:

Pooge wrote:

Not listed on their site, but I'm thinking an email saying that a few are needed due to poor CS at CI might spur a small direct buy??? Anyone else interested if I try?

Doug

I'm in, as long as it's the most current one with the big humps to clear 3" exhausts...

Did I see in that thread that Bobby posted that you have a Harris crossmember already in the SS?

Doug