Parts swap for Billy Mac's mod day?

Hey Guys, so I figured instead of cluttering up the main thread with parts stuff, I'd start a new one.

Here's what I've got. All are best offer. Unless I am told I need to suggest prices.

S10 floor shift console with shifter and cable - (I think it's held for Brian) $40
Dark grey S10 center console with spot for cd player, decent shape - $20
Bag of lace wheel centercaps (8 or so) - was that also Brian looking? - $20
5 nice 9c1 wheels - $100
4 15x8 american racing white wagon wheels. 4"BS. New condition. Never mounted. $100
Used dynomax 2.5" mid pipes with thrush turbos (1 mo old) $75
Used medium sized intercooler with misc silicone couplers and alum piping - $50
Small craftsman roller toolbox. $50
LT4 valvesprings 10k miles. $20
1.6 Aluminum Roller Rockers. BNIB $150
Ventvisor set for an 05-09 Subaru wagon. May fit other years. BNIB $20
Gray impala ss column shift steering column with lock and key $20
3rd gen Trans Am GTA taillights $40
4th gen f-body t56 console $10


I'll add more as I uncover things or remember stuff. Feel free to add your stuff, too.

measurements on intercooler?

Details on the rockers?

X-post of my list from Longroof
Full set RMW rubber trim, all from the same car. No holes. Full set only not selling it piece by piece. $100

Cruise control set up. Includes box, wiring and control stalk. $30

91-93 blue vinyl rear sedan bench skins. Good shape, will fit TBI wagons $15

94-96 grey vinyl (leather?) rear bench skins. Good shape $40

toomanytoyz wrote:

5 nice 9c1 wheels - $100
Small craftsman roller toolbox. $50
LT4 valvesprings 10k miles. $20
1.6 Aluminum Roller Rockers. BNIB $150

I am interested in this stuff Bill. I would only want one 9c1 N97 if someone else wants the other 4. Give ya $20 Just need it for a spare.

If Justin does not take the roller rockers, I will. What brand? Self aligning?

Pic of tool box. 

I am looking for a Front seat bottom skin for an Impala. Passengers or drivers as long as it is not ripped, light grey headliner, and sun visors for any 91-96 cappy/impala sedan in good shape.

IMPALADAKID wrote:

toomanytoyz wrote:

5 nice 9c1 wheels - $100
Small craftsman roller toolbox. $50
LT4 valvesprings 10k miles. $20
1.6 Aluminum Roller Rockers. BNIB $150

I am interested in this stuff Bill. I would only want one 9c1 N97 if someone else wants the other 4. Give ya $20 Just need it for a spare.

If Justin does not take the roller rockers, I will. What brand? Self aligning?

Btw Billy, do you still want that Reybestos idler arm?

Cadet57 wrote:

IMPALADAKID wrote:

toomanytoyz wrote:

5 nice 9c1 wheels - $100
Small craftsman roller toolbox. $50
LT4 valvesprings 10k miles. $20
1.6 Aluminum Roller Rockers. BNIB $150

I am interested in this stuff Bill. I would only want one 9c1 N97 if someone else wants the other 4. Give ya $20 Just need it for a spare.

If Justin does not take the roller rockers, I will. What brand? Self aligning?

Btw Billy, do you still want that Reybestos idler arm?

Yes. It was $12 bucks correct?

IMPALADAKID wrote:

Yes. It was $12 bucks correct?

Yep.   

Sweet! I didn't know I had those console parts reserved. And yes, I'll take those center caps.

I have some blue sun visors, Billy. A couple sets actually. Great shape. Powered mirror lights both sides with connectors I know you said gray, but that's what I have.

I'm also bringing a Streetrends performance spoiler for someone??

I have lots of parts if anyone needs something weird like trunk weather seal, headlight lower rubber strips, 93-96 tail lights, speaker covers, door speakers out of Fisha's old white Caprice, Cadillac skirts, so on and so forth.

MASShole9C1 wrote:

I have some blue sun visors, Billy. A couple sets actually. Great shape. Powered mirror lights both sides with connectors I know you said gray, but that's what I have.

Sweet.

MASShole9C1 wrote:

I'm also bringing a Streetrends performance spoiler for someone??

Me. lol

I'll get measurements and pics tomorrow for all who asked.

I'm actually looking for a pair of blue 9c1 front door panels with power windows, also.

I have lowers, but dark blue. They are power. TBI tho I believe. I rock those manual windows

Roller rockers are orange aluminum, along the lines of the Proforms but supposedly better quality. Self aligning.


Intercooler core is 12"x12" with 3" inlet/outlet


Toolbox is 48" tall. 6 drawers and cabinet with shelf. Fairly experienced. Stickers are free.


9c1 wheels. One has a ding on the lip, but they balance out ok.


American Racing wheels

MASShole9C1 wrote:

headlight lower rubber strips

I actually need a pair of these. Maaco left some white paint on mine.   

Brian, I have the rear lower mounting bracket on that console.

Cadet57 wrote:

MASShole9C1 wrote:

headlight lower rubber strips

I actually need a pair of these. Maaco left some white paint on mine.   

I'll bring a set for you then

toomanytoyz wrote:

Brian, I have the rear lower mounting bracket on that console.

Shweeeet

I'm still looking for some blue Bonneville seats, if someone has some for sale.    

I plan on being there.

I'll take second dibs on tool box. Top and bottom?

Billy, rockers are yours. I'm going to hold off on them until I do some more research into putting 1.6's in my car.

I'm probably taking the yellow Impala so I'm limited as to what I can bring with me.

I still have the white trunklid with the primered SS spoiler, but I don't know if that's going to fit in my cars trunk.  

I was going to put these on Craigslist (I'm 99 percent certain on selling them since I'll have to have a trans rebuilt...), but I will have a set of SS wheels/caps and tires at that point, 2 tires are like new with a 2010 date code (General Grabber UHP) and the other 2 are Riken Raptors that will need replacement at some point but may have life left in them.  I'm looking to get 500 for those. The wheels aren't World of Wheels quality but aren't crappy either.   I might not be able to take all of them with me, I can get 2 in my trunk and mayyyybe wrap 2 in blankets and put them in my back seat.

I need to dig through whatever else I have, I think I sold most of it and have mostly spare things to leave hanging around for my car.  

I do have a chrome Holley 10" (?) open element air cleaner/filter that was on the '74 when I bought it, I put a bigger one on there.  Probably take ten bucks for that if someone with a carb or a TBI wants one, it's in nice shape. I think it'll fit those.

I have a few sets of Roadmaster dash vents.

Ahhhh.... 

gesus, i should load up the trailer and the truck, i got enough crap for 20 poeple unfortunatly i'm working.

Is that inter cooler 12" core to core, or side to side?

Asking for a friend who's looking for one for his Audi somethingorother...

No Moa wrote:

gesus, i should load up the trailer and the truck, i got enough crap for 20 poeple unfortunatly i'm working.

Next mod day at Glen's house

Matt Trakker wrote:

No Moa wrote:

gesus, i should load up the trailer and the truck, i got enough crap for 20 poeple unfortunatly i'm working.

Next mod day at Glen's house

Haha, you guys would go nuts in my junk/crap/bbody parts piles.

Maybe I'll take a ride up when the SS is fixed. LOL

Matt Trakker wrote:

Maybe I'll take a ride up when the SS is fixed. LOL

Bring the Tahoe, i might feel like giving shit away

No Moa wrote:

Haha, you guys would go nuts in my junk/crap/bbody parts piles.

The promise land.   

MASShole9C1 wrote:

Is that inter cooler 12" core to core, or side to side?

Asking for a friend who's looking for one for his Audi somethingorother...

That's the size of the core. The end tanks are like 3" more per side at the outlets, and an inch or so more at the base.

I've been there. I've seen. Didn't get the T shirt tho. You ever find that blue drivers side front manual door panel??

Also, if anyone is interested, I have that 9C1 TBI cluster. Deep price cut if you take it at mod day  

toomanytoyz wrote:

MASShole9C1 wrote:

Is that inter cooler 12" core to core, or side to side?

Asking for a friend who's looking for one for his Audi somethingorother...

That's the size of the core. The end tanks are like 3" more per side at the outlets, and an inch or so more at the base.

Thank you. I'll pass the info along.

Brian, want to trade the smooth tails for the stuff from me?

"Smooth"?

I thought you had a pair of 91-2 tails for sale. I could be mistaken.

I have 2 sets of 93-96 and I have lenses for 91-92 with the center trim sections.

IMPALADAKID wrote:

I am looking for a Front seat bottom skin for an Impala. Passengers or drivers as long as it is not ripped,  light grey headliner, and sun visors for any 91-96 cappy/impala sedan in good shape.

Along with this stuff, I am also looking for a spare tire hold down, and spare tire cover.

toomanytoyz wrote:

I thought you had a pair of 91-2 tails for sale. I could be mistaken.

Those are Indy's.

Also, since when do you need sedan parts?    

I don't, now.

I'll probably let my charcoal leather 12-way bonnies go, too. Good driver shape. With wiring, controller, and modified rails to bolt right into the B cars. $150

So I have a decent pair of 235/55-17 Eagle rs tires, got a good couple summers left in them...$50 for the pair
And the spare lace Caprice wheel from my car with a goodyear 235/70-15 on it really nice condition....$30 if anyone is interested

toomanytoyz wrote:

I don't, now.

I'll probably let my charcoal leather 12-way bonnies go, too. Good driver shape. With wiring, controller, and modified rails to bolt right into the B cars. $150

I seen these. They are nice.

cloud 9 wrote:

And the spare lace Caprice wheel from my car with a goodyear 235/70-15 on it really nice condition....$30 if anyone is interested

Bill C. Scratch the one 9c1 wheel I was interested in. Rob, I will take the lacy wheel with tire please.

Oh, also have a set of Hi/Lo HID's. Includes bulbs, ballast, and wiring. How's $40 sound?

IMPALADAKID wrote:

Bill C. Scratch the one 9c1 wheel I was interested in. Rob, I will take the lacy wheel with tire please.

Soooooooo, how much for the one wheel   I need either an N97 or a biscuit RM wheel for the caprice, I'd rather the cop stuff than the cookie!

Updated my list.

Full set RMW rubber trim, all from the same car. No holes. Full set only not selling it piece by piece. $100

Cruise control set up. Includes box, wiring and control stalk. $30

91-93 blue vinyl rear sedan bench skins. Good shape, will fit TBI wagons $15

94-96 grey vinyl (leather?) rear bench skins. Good shape $40

Hi/Lo 8k(?) HID kit. Includes harness, ballast, bulbs, etc. $40

9C1 vinyl FRONT buckets. The ones currently in my car, $20 for the pair. I'm going to swap in my cloth buckets so if I dont have to take these home even better.   

hmmm that is a small intercooler.

I am looking for a full size spare......or five 15x7 steelies.

IMPALADAKID wrote:

MalibuSSwagon wrote:

hmmm that is a small intercooler.

I am looking for a full size spare......or five 15x7 steelies.

toomanytoyz wrote:

5 nice 9c1 wheels - $100

I think hes looking for dog dish steels

I have more lace wheels than any one man should have, one with a brand new tire and a pair with good Indy 500 firehawks on them, and probably 7 more with tires that hold air. I may have a few steelies as well ( the civilian steelies without the threaded hole for the caps. I'm looking for a LTZ Flat hood emblem if anyone has one let me know. Thanks

What size are the fire hawks. Would love a couple spares!

I have a pair of 235/70-15 (the good pair) and a pair of 225/70-15 (small amount of dry rot, just starting to crack).

BostonChevy wrote:

I have a pair of 235/70-15

How much for one (or both) of the 235's?

I'd sell the pair for $80 or trade for a LTZ Hood emblem, sorry but I don't want to separate. I do have the other lace wheel with a new 235/70-15 on it, it's a Goodyear eagle GA with the thin white wall on it for $40.

Cadet57 wrote:

I think hes looking for dog dish steels

Yes, yes I am looking for nubby steels. Not to copy you or anything......Also really want to ditch the mini spare, I hate those even tho I've never had to put a spare on one of my cars before.