1996 9c1 caprice part out

I just got a 96 9c1 166k everything minus the tranny available let me know what u want

Mike, how's the body, I'm looking for a good roller for a project motor I have.

what color is the interior. i need a red driver door arm i kinda ripped mine off lol.

blue. cloth front seats and vinal rear seat

Dang, always wanted a blue or black 9c1. Wish the body was better.

its pretty good on the outside but the rear quarters are goin and the wheelwells in the trunk are goin. plus the lower part of the b-piller are rotted

has
-cat back flowmaster exuast
-decent lt1
-trunk
-hood
-3 doors are good (pass front has rot hole)
-disk rearend (needs a axal seal)
-sway bars,a-arms,trailing arms,gas tank
-tail lights,headlights
-clear corners
-good grill
-ect..
text or call me 781-760-3849

Mike, what condition is the driver side heat shield in?

96slowss wrote:

has
-cat back flowmaster exuast
-decent lt1
-trunk
-hood
-3 doors are good (pass front has rot hole)
-disk rearend (needs a axal seal)
-sway bars,a-arms,trailing arms,gas tank
-tail lights,headlights
-clear corners
-good grill
-ect..
text or call me 781-760-3849

I don't know if the car will end up being parted out, but if it does, and the front clip is free from rust-through, count me in.
My SS has big holes in both front inner fender wells and radiator support.
Also, my hood has indentations from some gorilla who "ham-fisted" it.

I like those trim rings, how much for the set?

I think this one was on Craigslist? Good buy if all you needed was a tranny. Does it have the upper door panels with the pull strap? I would think not with it being a 9c1.

-ill check out the heat sheilds tonight.

- the hood looks pretty decent and its a factory one, one of the inner fender wells has a hole in the top, and not sure on the support intil i look 2night.

-the trim rings might be sold, not to sure yet ill let u know

- and the tranny is built with a shift kit, thats y i got the car, it was a friends car and he gave me the car and $600 for my white 94 9c1

pm sent

Drive shaft looks great. I'll install it tomorrow. Thanks Mike

no problem, let me know if u need anything else

-Front chrome wheel arch things
-Taillights
-Gear shifter (9C1 shifter is longer. I like that one more)
-antenna stud

$50 bucks. Come down and grab it all

How's the passenger inner fender?

How much for the exhaust

96slowss wrote:

-the trim rings might be sold, not to sure yet ill let u know

PM me if they are available

96Brougham wrote:

How's the passenger inner fender?

i think its good, ill have 2 look when i get home.

GasTT wrote:

How much for the exhaust

when i pulled it out one of the flanges on the muffler broke off so its in 2 peices per side. if u wanted to piece it 2gether or use some of it u can come take it.

Cadet57 wrote:

-Front chrome wheel arch things
-Taillights
-Gear shifter (9C1 shifter is longer. I like that one more)
-antenna stud

still want these parts? everything is off and set aside.

96slowss wrote:

still want these parts? everything is off and set aside.

I am still interested in the front clip, especially both the inner fender wells, passenger fender and radiator support.

Can you look also at the overall condition of the front & rear bumper skins?

Thanks

Inners are rotted pass fender is junk. Radiator support is ok. And the rear bumper is real nice front is ok. Couple marks call/text me 7817603849

i still have 2 good rear doors one has no glass.- $50

rear and front bumpers- $50 each

tail lights- $40 for both

all inside trim,door panels, dash pad, dash peices all 9c1 blue

CALL/TEXT WITH ANY QUESTIONS 7817603849

THANKS..

96slowss wrote:

Cadet57 wrote:

-Front chrome wheel arch things
-Taillights
-Gear shifter (9C1 shifter is longer. I like that one more)
-antenna stud

still want these parts? everything is off and set aside.

I do. I just don't have time to get up there before Wagon Fest. I'll text you and we can set something up.

Cadet57 wrote:

96slowss wrote:

Cadet57 wrote:

-Front chrome wheel arch things
-Taillights
-Gear shifter (9C1 shifter is longer. I like that one more)
-antenna stud

still want these parts? everything is off and set aside.

I do. I just don't have time to get up there before Wagon Fest. I'll text you and we can set something up.

I'll pick this stuff up @ Mod day.

Is it a posi rear? how much for just the diff?

HELLO 96SLOWSS
FOR A 1996 cAPRICE I'M IN NEED OF THE LEFT REAR WHEEL WELL MOLDING. must be in perfect order, do you have one ? and do you ship to the Netherlands ?
let me know
Graat

wth?

left rear fender trim !!!??? chrome wheel arch!! ??

bfurches wrote:

Is it a posi rear? how much for just the diff?

rearend sold already.

graat wrote:

HELLO 96SLOWSS
FOR A 1996 cAPRICE I'M IN NEED OF THE LEFT REAR WHEEL WELL MOLDING. must be in perfect order, do you have one ? and do you ship to the Netherlands ?
let me know
Graat

the wheelwell trim is there but iam not sure about the shipping id have to find out what it would be

96Brougham wrote:

wth?

96slowss wrote:

bfurches wrote:

Is it a posi rear? how much for just the diff?

rearend sold already.

graat wrote:

HELLO 96SLOWSS
FOR A 1996 cAPRICE I'M IN NEED OF THE LEFT REAR WHEEL WELL MOLDING. must be in perfect order, do you have one ? and do you ship to the Netherlands ?
let me know
Graat

the wheelwell trim is there but iam not sure about the shipping id have to find out what it would be

mike,
assuming this isn't a scam I used to ship parts via a company called Bax global. I don't even know if the company is still around.