Cheap Cars That Could Use a LT1/LSx Swap

http://boston.craigslist.org/nos/cto/1528317110.html

https://badass-of-ne.forumotion.com/cars-for-sale-or-wanted-f6/any-interest-in-a-muscle-car-t885.htm
It's at a far lower price than the original one mentioned

1986 CAMARO IROC Z
http://nh.craigslist.org/cto/1537593040.html

Funny, I got big ugly in Danville, too...

Or was it Sandown? Meh. Same thing.

I am going to have to go look at that camaro tomorrow, you asshat. Thanks.

Like it took a lot of arm twisting.

I thought you liked Firebirds.

Check out what 5% is rusted. Most likely at the bottom of the A pillar. You should be able to see it behind the fender.

You'll need a new instrument cluster with a LT1. Maybe it was 90 that they went electronic.

Here's another : http://nh.craigslist.org/cto/1535860689.html

and: http://nh.craigslist.org/cto/1535985404.html

or: http://boston.craigslist.org/nwb/cto/1539044114.html

Last but not least, bizarro big ugly: http://boston.craigslist.org/gbs/cto/1537695487.html

I like the 91-2 birds.

It was sold already. Bummer. I was totally diggin the red interior.

1991 Chevy Camaro RS (methuen)
http://nh.craigslist.org/cto/1549900596.html

toomanytoyz wrote:

I like the 91-2 birds.

It was sold already. Bummer. I was totally diggin the red interior.

This will get you part way there.

82-92 Camaro Interior Red - $100
http://boston.craigslist.org/sob/pts/1552695420.html

Door panels?

89 camaro - $1000 (nashua)

http://nh.craigslist.org/cto/1599011611.html

http://boston.craigslist.org/nos/cto/1625442134.html

http://boston.craigslist.org/nos/cto/2104166338.html

1995 Chevy Camaro convertable - $500 (salem ma)

http://boston.craigslist.org/gbs/pts/2116394421.html

95 CAMARO PARTS CAR - $500 (TAUNTON)

boojum wrote:

http://boston.craigslist.org/nos/cto/2104166338.html

1995 Chevy Camaro convertable - $500 (salem ma)

The ad is gone, but I remember the car with the mismatched purple door and some kid is now tooting around in it in Saugus, lol

No problem, here's another:

http://boston.craigslist.org/gbs/pts/2116503937.html

LOL if you guys didn't notice, that's my old Z28.

Lol he didn't wast anytime! Lol

Nope, he said he needs the motor harness computer and trans for his '71 skylark he wants finished for spring time.

http://boston.craigslist.org/gbs/cto/2177350262.html
87 camaro - $700



http://boston.craigslist.org/bmw/cto/2174898806.html
91 Camaro Z28 rolling chassis SOLID - $700



http://boston.craigslist.org/bmw/cto/2174076451.html
91 camaro rs not running - $900

1986 camaro - $500
http://nh.craigslist.org/cto/2555457012.html

1985 camaro z28 - $250
http://nh.craigslist.org/cto/2555463493.html

http://nh.craigslist.org/cto/2739304462.html
1979 olds cutlass trade for a camaro - $700

http://boston.craigslist.org/nos/pts/2734675074.html
1971 chevy el camino project / parts car - $500

http://nh.craigslist.org/pts/2740111814.html
1995 chevy 2500 parts truck
i have a 95 chevy 2wd 2500 8lug parts truck it has no engine,trans or bed its a roling chassie good doors,cab,glass,wheeles,tires,rearend,frame and interior many good parts i will take off and deliver for the right price.

http://nh.craigslist.org/pts/2731106500.html
For Parts or Fix... Chevy s10 - $200
For Sale:
I have a 1997 S-10 pick up for sale.. I do not have the title as I had purchased this for parts myself for a project and then didn't need it.

Many good and usable parts on this truck:
So far the following parts have been sold and removed:
Engine- Transmission - Front headlights and Rear tail lights - tailgate.

First $200 bucks takes it!

^^^ ^^^
Good one!! I agree..

http://providence.craigslist.org/cto/2647879859.html

http://nh.craigslist.org/cto/2715690815.html

Matt Trakker wrote:

http://providence.craigslist.org/cto/2647879859.html

werd. I came about $50 short of buying a Chevette in High School to drop a small block in. As cool as it would have been, I'm glad I didn't do it. It would have been a lot of work, but a lot more money

Matt Trakker wrote:

http://nh.craigslist.org/cto/2715690815.html

I would drive the hell out of that car.

It's too bad the Chevette wagon never made it to the States.

Cadet57 wrote:

Matt Trakker wrote:

http://nh.craigslist.org/cto/2715690815.html

I would drive the hell out of that car.

Make it a GLH and I would too!

1984twodoor wrote:

Cadet57 wrote:

Matt Trakker wrote:

http://nh.craigslist.org/cto/2715690815.html

I would drive the hell out of that car.

Make it a GLH and I would too!

Make mine a 5.0 mustang eating GLHS, and you got a deal.

IMPALADAKID wrote:

1984twodoor wrote:

Cadet57 wrote:

Matt Trakker wrote:

http://nh.craigslist.org/cto/2715690815.html

I would drive the hell out of that car.

Make it a GLH and I would too!

Make mine a 5.0 mustang eating GLHS, and you got a deal.

Dear ....

IMPALADAKID wrote:

Do you want I should pull it out of the Roadmaster now?

If noone buys my lt1/t56 soon I think they might have to go in this. I already have a clutch pedal sitting in there doing nothing....

8bud wrote:

If noone buys my lt1/t56 soon I think they might have to go in this. I already have a clutch pedal sitting in there doing nothing....

Ahem...NO ONE BUY HIS PARTS! I want to see that get the swap. It really looks bone stock and that combo would be insane

8bud wrote:

If noone buys my lt1/t56 soon I think they might have to go in this. I already have a clutch pedal sitting in there doing nothing....

Bill, you need to do the swap. With lots of pics.

mp775 wrote:

It's too bad the Chevette wagon never made it to the States.

Very true, but they made these here

IMPALADAKID wrote:

8bud wrote:

If noone buys my lt1/t56 soon I think they might have to go in this. I already have a clutch pedal sitting in there doing nothing....

Bill, you need to do the swap. With lots of pics.

Other than the GTA wheels and the two tailpipes coming out at the stock location you would never know it has a 350 in it now. Until I start it up and the dual glass packs make some noise.

It originally had a 2.8 5speed. So I have a clutch pedal waiting, I'm just trying to find out if I can use the headers off the tbi 350 or if someone makes some for this swap. Anyone know?

8bud wrote:

It originally had a 2.8 5speed. So I have a clutch pedal waiting, I'm just trying to find out if I can use the headers off the tbi 350 or if someone makes some for this swap. Anyone know?

Tbi headers should bolt up to an LT1. The LT1 is D-port shaped and the headers are ovals, but it works. I have headers made for a 3rd gen on the LT1 in my Camaro. The stock manifolds would have bolted up as well.

I would prefer to use the stock camaro manifolds, but they wont fit because they will hit the s10 steering shaft. I guess I would use the headers I have if they will work. Sorry to go off topic here. Maybe Ill start a new thread in a more appropriate spot.

http://nh.craigslist.org/pts/2743968969.html
85 fox body roller - $1500

http://nh.craigslist.org/cto/2692313158.html
96 Trans Am (needs engine work) - $1000
96 Trans Am, needs engine work, 350 engine v8. Automatic transmission over 240,000 mile. body and interrior in good shape. Selling as is. Engine needs major work if not a new one. mechanics dream car. t-tops too.

Title fixed.

boojum wrote:

Title fixed.

About time! Now I can start paying attention to the thread!

toomanytoyz wrote:

boojum wrote:

Title fixed.

About time! Now I can start paying attention to the thread!

X2

http://boston.craigslist.org/sob/cto/2746849944.html
1986 Camaro F-Body - $850

http://nh.craigslist.org/pts/2698383684.html
98 Chevy S10 Pickup for parts - $500

http://boston.craigslist.org/sob/pts/2750567303.html
Forged LS1/LS6 - $4500

Doug?

http://nh.craigslist.org/zip/2760570208.html
free subaru imprezza. (keene)
its a 2002 subaru imprezza .you hault it away and its yours.IT DOES NOT RUN. IDK WHATS WRONG WITH IT.

boojum wrote:

Doug?

http://nh.craigslist.org/zip/2760570208.html
free subaru imprezza. (keene)
its a 2002 subaru imprezza .you hault it away and its yours.IT DOES NOT RUN. IDK WHATS WRONG WITH IT.

Truck is running, waiting for him to text me back, so I can go look at it. I work in Keene...awesome

Thanks Jim