Crane 1.6 RR's Disscus.

I found these 1.6 RR's. What do you guys think?

Crane gold race roller rockers. 1.6 Ratio that will fit lt1 motors. Was going to put on my 93 firebird but got rid of the car before I had the chance. All rockers are in exc. shape. Great power adder. $200 OBO

I've been dying to do this to my 96
I know its not big HP gains but in my head it seems like it would help alot
Are these the 3/8 stud self aligning? Crane 10758-16 ?
& they are for sale?
or
you want to discuss your asking price to drive it up or down for a buyer?

I've never done this mod ever. I'm not sure if they will work on the LT1 and not sure about the price. And no, I'm not trying to drive up the price. Just looking for some friendly advice from guy's who have done this mod before and whatever help I can get to purchase some RR's in the future.

No offense at all meant in my post Tom
I was really just trying to figure out what you wanted to do
When I saw

Tomz9C1 wrote:

$200 OBO

It looked like you were selling, but it wasnt the 4 sale section so
thats why I asked the other questions
Crane sells the 3/8 stud in non OR self aligning
I know we use self aligning & thats the # I posted above
Applys to 1988-95 Chevy LT1/LT4 (305 & 350 V8) *Not for use in LS1 engines
I dont know how you look & tell if its non OR self aligning?
Why it doesnt apply to 96 is a mystery to me too?
Crane says 25HP gain, I've heard thats a pipe dream, but I never did mod
Heres the JEGS link
http://www.jegs.com/p/Crane/Crane-Cams-Gold-Race-Aluminum-Rockers/744608/10002/-1

I would use these
http://cgi.ebay.com/ebaymotors/COMP-CAMS-1318-16-SBC-PRO-MAGNUM-ROCKERS-1-6-3-8-STUD_W0QQcmdZViewItemQQhashZitem20abce128fQQitemZ140321362575QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
if you have guide plates and screw in studs then upgrade to 7/16 studs and non self aligning rockers & pushrods

sdstick wrote:

No offense at all meant in my post Tom
I was really just trying to figure out what you wanted to do
When I saw

Tomz9C1 wrote:

$200 OBO

It looked like you were selling, but it wasnt the 4 sale section so
thats why I asked the other questions
Crane sells the 3/8 stud in non OR self aligning
I know we use self aligning & thats the # I posted above
Applys to 1988-95 Chevy LT1/LT4 (305 & 350 V8) *Not for use in LS1 engines
I dont know how you look & tell if its non OR self aligning?
Why it doesnt apply to 96 is a mystery to me too?
Crane says 25HP gain, I've heard thats a pipe dream, but I never did mod
Heres the JEGS link
http://www.jegs.com/p/Crane/Crane-Cams-Gold-Race-Aluminum-Rockers/744608/10002/-1

No offense taken I think Bob's found me some. I've adjusted the stockers on the 94 which by my suprise came out fine.

I get it now, you were saying you found some 4 sale for 200 OBO
OK I thought you meant you found them in your garage or something
..................never mind I was asleep at the wheel..............