Springs

Posts : 2182 Join date : 2009-01-21 Age : 37 Location : NH

I was thinking of getting these springs for the Impala:

Moog 7170

Inside Diameter 4.000
Bar Diameter .812
Install Height 10.50
Load 1815
Spring Rate 845
Free Height 12.60
Should be around a 1" drop.

And maybe later for the rear:
80108, 5415, 5041, 8537, 5387,6381
Rates range from 169-198
All should be from 1/2"-1" drop.

Any thoughts?

Subject: Re: Springs Fri Mar 16, 2012 9:52 pm

I think they sound like possible spring/fall springs... Wink

Posts : 2182 Join date : 2009-01-21 Age : 37 Location : NH

Moog 7170 in the front (845 lb. for about -1")
and 5387 in the back (157 lb. for about -1/2") or just keep the SS stockers

Posts : 2182 Join date : 2009-01-21 Age : 37 Location : NH

nervermind

Posts : 4294 Join date : 2009-12-16

Why nevermind?

Posts : 2182 Join date : 2009-01-21 Age : 37 Location : NH

Because I went with Moog 5662.

Posts : 4294 Join date : 2009-12-16

I knew that...

» How much to cut off front springs to match SS rear springs?
» Are wagon springs any different from sedan springs?
» Should I put the SS front springs in my 94 9C1?
» Stock SS Springs or cut 9C1 springs?
» need front springs..