| BADASS of New England An automobile club for the enthusiast who enjoys the last of the big GM cars. The rear wheel drive B and D bodys. Chevrolet Impala SS, Caprice, 9C1, Buick Roadmaster, Oldsmobile Custom Cruiser, Cadillac Fleetwood |
Who is online? | In total there are 6 users online :: 0 Registered, 0 Hidden and 6 Guests None Most users ever online was 182 on Thu May 27, 2021 9:57 pm |
April 2024 | Mon | Tue | Wed | Thu | Fri | Sat | Sun |
---|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | | | | | | Calendar |
|
| | Anybody need a harness/ pcm for an LSX swap? | |
| | Author | Message |
---|
bfurches
Posts : 1061 Join date : 2010-04-20 Age : 36 Location : Springfield, MA
| Subject: Anybody need a harness/ pcm for an LSX swap? Fri Jul 15, 2011 11:49 am | |
| I have a complete uncut wiring harness from a gmc or chevy truck that had a 5.3 and 4l60e 2wd transmission. The harness is complete and uncut complete with PCM and a full set of truck coils with brackets. It is my understanding this is the easiest harness to swap for lsx based swaps. More info on building the conversion portion here: http://www.lt1swap.com/2000harness.htm I would like to get 250 for the whole thing. Thats harness, PCM and coils! | |
| | | V8Killer
Posts : 1691 Join date : 2009-03-12 Age : 52 Location : Southern, NH
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Fri Jul 15, 2011 1:53 pm | |
| What year? Regular throttle-body or electric? PCM part #? TIA
| |
| | | bfurches
Posts : 1061 Join date : 2010-04-20 Age : 36 Location : Springfield, MA
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Fri Jul 15, 2011 2:15 pm | |
| Not positive of the year, you would have to figure it out by following the pin-out on the link provided but i believe it was 01-02
The ecu I have is Serv#12582605
it was drive by wire | |
| | | Matt Trakker
Posts : 5093 Join date : 2009-07-30 Age : 42 Location : Reading, MA
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Fri Jul 15, 2011 7:38 pm | |
| I think drive-by-wire started in 2003??? If not just ignore my contribution..lol | |
| | | Pooge
Posts : 1700 Join date : 2009-03-24
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Fri Jul 15, 2011 10:22 pm | |
| - Matt Trakker wrote:
- I think drive-by-wire started in 2003??? If not just ignore my contribution..lol
I thought so too, but I believe some of the tahoes came with it in 02 Doug | |
| | | 1984twodoor
Posts : 4068 Join date : 2010-03-30 Age : 30 Location : Wilmington/Wakefield/Andover
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Sat Jul 16, 2011 1:16 am | |
| - Matt Trakker wrote:
- I think drive-by-wire started in 2003??? If not just ignore my contribution..lol
I cleaned an 02 duramax with drive by wire, peddle felt like JUNK! No idea if that matters in the relm of ls though. | |
| | | bfurches
Posts : 1061 Join date : 2010-04-20 Age : 36 Location : Springfield, MA
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? Sat Jul 16, 2011 10:05 am | |
| Maybe it was an 03 lol. I cant remember for the life of me. All i know for sure is it had dbw, and it was a 2wd truck | |
| | | Sponsored content
| Subject: Re: Anybody need a harness/ pcm for an LSX swap? | |
| |
| | | | Anybody need a harness/ pcm for an LSX swap? | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
|