| WTB --- Cast Iron Cylinder Heads | |
|
|
Author | Message |
---|
BowtieSS
Posts : 47 Join date : 2009-02-16 Age : 51 Location : Manchester, NH
| Subject: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 7:14 am | |
| Looking to buy a set of "320" Cast iron cylinder heads, not looking to do any work to them accept clean them and install them. Possibly an intake as well.
Let me know what you have,
Thanks. | |
|
| |
Guest Guest
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 7:35 am | |
| - BowtieSS wrote:
- Looking to buy a set of "320" Cast iron cylinder heads, not looking to do any work to them accept clean them and install them. Possibly an intake as well.
Let me know what you have,
Thanks. If "320" is standard LT1, I have a nice set with 81k on them. |
|
| |
BowtieSS
Posts : 47 Join date : 2009-02-16 Age : 51 Location : Manchester, NH
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 7:57 am | |
| They can come with 290's or 320's, I have a set of 290's. If they are 320's how much are you looking to get for them? | |
|
| |
Guest Guest
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 8:12 am | |
| - BowtieSS wrote:
- They can come with 290's or 320's, I have a set of 290's. If they are 320's how much are you looking to get for them?
Where would I find the number Bruce? I will check, if they are, make me an offer. |
|
| |
BowtieSS
Posts : 47 Join date : 2009-02-16 Age : 51 Location : Manchester, NH
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 8:29 am | |
| you'll find the number between the 2nd and 3rd rocker stud --10125320--
Are you interested in a short block that needs a rebuild? | |
|
| |
Guest Guest
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 8:32 am | |
| - BowtieSS wrote:
- you'll find the number between the 2nd and 3rd rocker stud --10125320--
I will check today. - BowtieSS wrote:
Are you interested in a short block that needs a rebuild? No, I have one, but thanks for asking. |
|
| |
druzdcm
Posts : 166 Join date : 2009-02-24 Age : 46
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 10:30 am | |
| I have intake(s) if you are looking for one. | |
|
| |
Guest Guest
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 11:06 am | |
| Ok Bruce, I comfirmed the 10125320 on both heads. LMK. Also have an intake to boot, and the rest of the engine if you would like. |
|
| |
96Brougham
Posts : 819 Join date : 2009-02-02 Age : 36 Location : Easton MA
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 11:22 am | |
| Not to thread jack, but what is the difference in the two heads? | |
|
| |
Guest Guest
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 12:41 pm | |
| - 96Brougham wrote:
- Not to thread jack, but what is the difference in the two heads?
LOL. I was going to ask the same thing. |
|
| |
BowtieSS
Posts : 47 Join date : 2009-02-16 Age : 51 Location : Manchester, NH
| Subject: Re: WTB --- Cast Iron Cylinder Heads Sun Apr 04, 2010 8:41 pm | |
| I don't know what the difference is between the two, I just want to put on exactly what I took off. Years ago I did a very bad port match job on my orig. heads and intake. I'm now reassembling my orig. engine and want no problems. | |
|
| |
Sponsored content
| Subject: Re: WTB --- Cast Iron Cylinder Heads | |
| |
|
| |
| WTB --- Cast Iron Cylinder Heads | |
|