Mod Day parts swap.

I figured I'd start this off. Looking for a 94-96 Caprice digi cluster. Someone has to have 10 of them sitting around. Will swap parts, have a couple TBI intake hats off of FWD 4.5 Cadi's, Various SBC parts including LT headers off a 2nd gen Camaro (might fit a b-body!), and of course I'm parting a 2000 Silverado so if you need any pieces off that I have them.

I have a nice BBB SS grille...that trunk lid with the SS spoiler [doubt I can bring that with me but it's still here]...a spare 93 caprice taillight but I need to check what side it's for...some Roadmaster dash vents...ummmm what else...if someone needs 71 to 76 full size GM items let me know what you're looking for. I have a ton of parts for them. Have a new set of TRW Hef-T-Coil cargo coils that I definitely don't need since the same kind are in my car...a 75 Impala header panel I don't need...trim and such for around the fuel filler...sets of door panels [I have nice red 73-74 Caprice coupe ones but they are worth a fortune and likely going to eBay ] I can't even remember it all.

I have Fleetwood skirts, TBI 9C1 cluster, wagon rear glass struts, and a bunch of box body parts. A million other things. I'm looking for a blue leather non limited rms rear seat and a front Roadmaster wagon bumper.

https://badass-of-ne.forumotion.com/t5988-masshole9c1-for-sale-thread-updated-4-1-2015

A lot of digital clusters have problems, I probably have a couple bad ones. Can you use a Camaro cluster? Somewhere I've seen instructions on the internet to fix v6 tachometer versions.

Z28 cluster swap harnesses are built buy a guy who's local (MA)

I want the digi cluster for the speedometer itself to build a custom cluster. If you want to toss me a couple of bad ones to play with I don't mind.

Matt, how tall are those trw springs? Maybe I can try them out on the burb? I may be interested if they work.

MalibuSSwagon wrote:

I want the digi cluster for the speedometer itself to build a custom cluster. If you want to toss me a couple of bad ones to play with I don't mind.

You might when the Speedo is blank! I'll talk to you on mod day. 3rd gen Camaro for the last 2 or 3 years are digital. A few more years for Firebirds for other options.

MalibuSSwagon wrote:

I figured I'd start this off. Looking for a 94-96 Caprice digi cluster. Someone has to have 10 of them sitting around. Will swap parts, have a couple TBI intake hats off of FWD 4.5 Cadi's, Various SBC parts including LT headers off a 2nd gen Camaro (might fit a b-body!), and of course I'm parting a 2000 Silverado so if you need any pieces off that I have them.

4X4 Silverado?

Tomz9C1 wrote:

MalibuSSwagon wrote:

I figured I'd start this off. Looking for a 94-96 Caprice digi cluster. Someone has to have 10 of them sitting around. Will swap parts, have a couple TBI intake hats off of FWD 4.5 Cadi's, Various SBC parts including LT headers off a 2nd gen Camaro (might fit a b-body!), and of course I'm parting a 2000 Silverado so if you need any pieces off that I have them.

4X4 Silverado?

yes sir, 4x4

Tomz9C1 wrote:

MalibuSSwagon wrote:

I figured I'd start this off. Looking for a 94-96 Caprice digi cluster. Someone has to have 10 of them sitting around. Will swap parts, have a couple TBI intake hats off of FWD 4.5 Cadi's, Various SBC parts including LT headers off a 2nd gen Camaro (might fit a b-body!), and of course I'm parting a 2000 Silverado so if you need any pieces off that I have them.

4X4 Silverado?

Uh-Oh!...

PS: She doesnt even have her license yet..

MalibuSSwagon wrote:

Tomz9C1 wrote:

MalibuSSwagon wrote:

I figured I'd start this off. Looking for a 94-96 Caprice digi cluster. Someone has to have 10 of them sitting around. Will swap parts, have a couple TBI intake hats off of FWD 4.5 Cadi's, Various SBC parts including LT headers off a 2nd gen Camaro (might fit a b-body!), and of course I'm parting a 2000 Silverado so if you need any pieces off that I have them.

4X4 Silverado?

yes sir, 4x4

I need a transfer case to rebuild, wondering if its the same as my 2000 Burb 4x4?

She and her Brother will be learning soon at Grampy's driveway, my 1/8 mile Drag strip when I was 16. lol

It might be, however it's a manual shift transfer case and I'm willing to bet your Suburban is a push button shift.

Your right, mine is a push button.

If anyone has a gray plastic rocker/kick panel piece for the front passenger side of my rms, that'd be great.

Does anyone have a set of stock spindles?

Bill I'll try to find those springs...but I think they're buried. Lol. I'd prefer to just sell them outright to a known application then having people install them and stuff first...they're new and all kehd

I do have a few trim pieces for a 93-96 FWB...the corner lamp pieces for both sides. Have the driveshaft from the DGGM also.

toomanytoyz wrote:

Does anyone have a set of stock spindles?

FYI: Went through that fire drill last year....nothing surfaced.

If I could convince myself to part out my old wagon we'd be in business.

Dont really want a carcass (so THAT's where that word comes from?) hanging around

Vehicle starts & runs good just like it did it's entire career with me so someone will probably drive it away for couple hundred.

^^^^Sold!

Anyone have a spare set of RMW taillights they're looking to part with?

- J

anybody want my charcoal leather 12-way Bonnie's with harness? Just the front seats. 75 bucks. come on, somebody take these damn things so I stop tripping over them! what about a set of decent 9C1 cloth seats? Front and rear. Blue. 20 bucks.

MASShole9C1 wrote:

I have Fleetwood skirts, TBI 9C1 cluster, wagon rear glass struts, and a bunch of box body parts. A million other things. I'm looking for a blue leather non limited rms rear seat and a front Roadmaster wagon bumper.

https://badass-of-ne.forumotion.com/t5988-masshole9c1-for-sale-thread-updated-4-1-2015

I am interested in the Fleetwood Skirts.

If they are still available I will be at the meet.

700R4 with torque converter - $75 - From a '91 Camaro. Around 100K mi. Worked when removed a few years ago. Missing tail shaft housing.

700R4 with torque converter - $FREE - From a '90 Camaro. Unknown condition or miles. May not have the tail shaft housing.

Take both 700R4s for $25.


'95 LT1 block - U-pickup $40 - Rod knock? Around 100k mi. Has cast iron heads and intake. Missing opti, oil pressure sensor, other small misc. parts.

'95 LT1 block - U-pickup Free - Around 100k mi. Came from car caught in a flood.

Take both LT1 blocks for free.


4 NASCAR Aero 59 series wheels - $120 - 15x9-1/2  5x5  4-1/2 backspacing. I don't think these are DOT approved!  You might want to limit them for off road use only and at speeds below 200MPH. Paint has been removed around the lug holes. I'm not sure if they have red or yellow stripes, some may have two valve stems. Would probably look good on a C10! They don't weigh very much for a steel wheel. Aero wheels web page.

Around 35 traffic cones, great to set up your own autocross - will trade for two bottles of dark beer or a 3/8-16 thread restorer

Roadmaster sedan tail lights - make an offer. I have to find them so if you want photos it will be more money.


Let me know early 'cause I'll need to fix the brakes in Suburban and dig the stuff out. Delivery fee for the LT1s will be around $976, sorry but you'd have to pay for these in advance if you want me to bring them Sunday.

This guy. ^^^ Lol.

YachtDriver wrote:

MASShole9C1 wrote:

I have Fleetwood skirts, TBI 9C1 cluster, wagon rear glass struts, and a bunch of box body parts. A million other things. I'm looking for a blue leather non limited rms rear seat and a front Roadmaster wagon bumper.

https://badass-of-ne.forumotion.com/t5988-masshole9c1-for-sale-thread-updated-4-1-2015

I am interested in the Fleetwood Skirts.

If they are still available I will be at the meet.

You've got it. I'll be sure to pack them up for the trip.

sdstick wrote:

toomanytoyz wrote:

Does anyone have a set of stock spindles?

FYI: Went through that fire drill last year....nothing surfaced.

If I could convince myself to part out my old wagon we'd be in business.

Dont really want a carcass (so THAT's where that word comes from?) hanging around

Vehicle starts & runs good just like it did it's entire career with me so someone will probably drive it away for couple hundred.

I'd be into that. The wagon that is.

and and if anyone needs anything for a 2K silverado, club price. Like interior bits or whatever.

Anyone have a couple of stock wheels taking up needed space?
I could use 2, either OE 92 Roadmaster, or two OE style steel.
If Buick alloys, I'd haul home 4 if you don't want to be left with the odd pair (better take up my space than yours?).

I bought my car with a mis-matched set. If I ever put the old wheels on, it'd be nice if they matched.
Not a big deal, but worth the trouble for me if you want to be rid of them.

Cash only, I don't have a parts stash for trade.

All I have for wheels is a set of 80's truck rally wheels. Not sure if you'd be into that.

MalibuSSwagon wrote:

All I have for wheels is a set of 80's truck rally wheels. Not sure if you'd be into that.

Thanks, but no.
I have two sets of truck wheels that I like (one on the car now with snows, the other that I need to clean up to drive on this summer). I'm afraid I'd like the rallys also, and I need to stop collecting wheels.
I'm not looking for favorite wheels, just to match some of what came on my car into a matching set of four.
I know the Buick alloys get no respect, or that steel 15 inch are a dime a dozen (what people upgrade out of) and figured someone has some they want to get rid of, in which case I can help.

JaySS wrote:

Anyone have a spare set of RMW taillights they're looking to part with?

- J

There's a set in my local JY, but I won't have a chance to pull them for you by tomorrow.
If no one else comes through, we'll talk.

Long-shot for a neighbor:
Anyone know where I can find a tail-light assembly for a 1993 Buick Century Wagon (right side or both)?

(I told him: right era, wrong platform, and have encouraged him to get a real wagon instead; but I promised to keep my eyes open just the same).

802 wrote:

Long-shot for a neighbor:
Anyone know where I can find a tail-light assembly for a 1993 Buick Century Wagon (right side or both)?

(I told him: right era, wrong platform, and have encouraged him to get a real wagon instead; but I promised to keep my eyes open just the same).

car-parts.com ..... it searches junk yards with in your distance preference. I use it all the time for sourcing used parts. most have a price and condition listed as well as contact numbers

need a hood release cable for caprice'

and a trunk lock

bowtiepimp wrote:

802 wrote:

Long-shot for a neighbor:
Anyone know where I can find a tail-light assembly for a 1993 Buick Century Wagon (right side or both)?

(I told him: right era, wrong platform, and have encouraged him to get a real wagon instead; but I promised to keep my eyes open just the same).

car-parts.com ..... it searches junk yards with in your distance preference. I use it all the time for sourcing used parts. most have a price and condition listed as well as contact numbers

That was my advice to him. But I promised I'd give it a shot. Hey, you never know, right?

Late request, does anyone have a pair of rear TBI blue courtesy lights? I don't know when I'll get around to dying the ones I have and would rather just get some matching ones.