| CALLING ALL VULTURES!!! RMW part out! | |
|
+41984twodoor GasTT Cadet57 Ironfistdog 8 posters |
Author | Message |
---|
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: CALLING ALL VULTURES!!! RMW part out! Sat Jan 26, 2013 8:58 pm | |
| At 237k miles the blower motor crapped out the other day and I'm hearing a progressively louder noise from the lower end.
94 roadmaster wagon with Rms clip and tan interior.
I'm taking the 56 lights and the hvac system and the wheels, everything else is up for grabs.
I'm still driving it until I can get the stock coils back into the caddy (2 more to go) So at this point I'm just taking dibs (unless it's something that doesn't affect drivability) This is what id like to do:
You come down and grab what you want and YOU tell ME what you wanna pay. Obviously please offer a fair amount not $1.00 for half the car. But I'm not looking to make big bucks Chrome belt trim is gone, sail panels (door ones) are gone Quarters are not useable, and the carpet is junk. All body panels are in primer. Front doors have mirror holes welded up. Whatever is left goes to scrap. | |
|
| |
Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 1:52 pm | |
| - Ironfistdog wrote:
- Obviously please offer a fair amount not $1.00 for half the car.
Will $2.00 work? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 2:09 pm | |
| Everybodies a comedian I see | |
|
| |
Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 3:27 pm | |
| - Ironfistdog wrote:
- Everybodies a comedian I see
I try. Btw, I think Tim is looking for a grill. | |
|
| |
GasTT
Posts : 2675 Join date : 2009-01-19 Age : 36 Location : Treasure Coast, FL
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 3:45 pm | |
| | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 3:47 pm | |
| RMS clip. No rmw grille. And the clip is already "dibbed" anyway. | |
|
| |
1984twodoor
Posts : 4068 Join date : 2010-03-30 Age : 30 Location : Wilmington/Wakefield/Andover
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 9:44 pm | |
| - Ironfistdog wrote:
- RMS clip. No rmw grille. And the clip is already "dibbed" anyway.
Dibbed you say??? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 9:50 pm | |
| | |
|
| |
1984twodoor
Posts : 4068 Join date : 2010-03-30 Age : 30 Location : Wilmington/Wakefield/Andover
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 10:39 pm | |
| - Ironfistdog wrote:
- Bigwagonguy with the PM
Dang! I was hoping for something sneaky from a member of the SS | |
|
| |
sdstick
Posts : 4292 Join date : 2009-03-20 Location : Revere, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 10:49 pm | |
| I'll take the WW bottle complete Would LOVE all the hoses from there to the wipers too
| |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Jan 27, 2013 11:31 pm | |
| You got it steve. I can put it aside for when you come for the blaster, | |
|
| |
sdstick
Posts : 4292 Join date : 2009-03-20 Location : Revere, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Jan 28, 2013 9:13 am | |
| Great thanks, as soon as this god awful weather clears, I'll come out of my shell | |
|
| |
No Moa
Posts : 3893 Join date : 2009-02-21 Age : 51 Location : Midcoast Maine
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Jan 28, 2013 1:01 pm | |
| - sdstick wrote:
- Great thanks, as soon as this god awful weather clears, I'll come out of
my the shell closet. fixd | |
|
| |
sdstick
Posts : 4292 Join date : 2009-03-20 Location : Revere, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Jan 28, 2013 1:08 pm | |
| I'm buyin RMW parts....nothing for a subaru (or miata) Thanks for your help tho... .. | |
|
| |
No Moa
Posts : 3893 Join date : 2009-02-21 Age : 51 Location : Midcoast Maine
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Jan 28, 2013 1:14 pm | |
| Your welcome. | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 3:02 pm | |
| Wagon is ready for picking now, going for a sticker at Chris' tomorrow so the wagon is done,
Willing to take $300 for the car without the following: Rms clip Washer buckets and hoses Radio Steering wheel 56 lights Wheels ( I might have some to throw on there not sure yet)
Theres Plenty of good engine parts and s good transmission, rear end could make a nice "low gear" swap unit. Gonna give it a week and next weekend it goes to the yard. | |
|
| |
GasTT
Posts : 2675 Join date : 2009-01-19 Age : 36 Location : Treasure Coast, FL
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 3:27 pm | |
| Im going to assume its not a tow pack car? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 3:30 pm | |
| What's the rpo? It had a class 3 hitch and wiring for the towing but no idea if it was factory. | |
|
| |
GasTT
Posts : 2675 Join date : 2009-01-19 Age : 36 Location : Treasure Coast, FL
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 3:39 pm | |
| V92... does it have a mech fan? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 3:43 pm | |
| Yes mechanical fan, but didn't all the buick wagons have them? | |
|
| |
GasTT
Posts : 2675 Join date : 2009-01-19 Age : 36 Location : Treasure Coast, FL
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 6:39 pm | |
| No just tow pack cars. So, you have a 2.93 posi in that thing.. | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Wed Jan 30, 2013 6:58 pm | |
| I believe it. This this has some sack! | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 11:30 am | |
| BUMP car is still here. Took a lot of stuff off it, but there's still a ton of great parts. Front clip still available since I haven't gotten a pm back. All glass still on it. Tail gate, dash pad Cluster, vents, etc. -G80 rear end 2.93's -4l60e trans still in it. -Lt1 is still in it. (mostly) -mint-ish over the axle pipes for wagons (dual exhaust for 91-93)
I'm cutting the radiator support out (rotted anyway) And I gotta drain the gas, then it's gonna go.
| |
|
| |
GasTT
Posts : 2675 Join date : 2009-01-19 Age : 36 Location : Treasure Coast, FL
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 12:32 pm | |
| If you're letting the rear go cheap, and the posi still works, I'll take it. | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 12:54 pm | |
| Everything on the car is make an offer. So make a fair offer and it's yours. | |
|
| |
Bull
Posts : 223 Join date : 2012-09-22 Location : Western MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 2:48 pm | |
| How do the over the axle pipes dump, straight out or with an angle under the bumper? I could just bolt them in to my wagon? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 2:53 pm | |
| They dump to the side I believe. (they are stock pipes) They had to be cut from the mufflers but a little welding to the ends and they would go right in, | |
|
| |
Bull
Posts : 223 Join date : 2012-09-22 Location : Western MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 3:46 pm | |
| - Ironfistdog wrote:
- They dump to the side I believe. (they are stock pipes)
They had to be cut from the mufflers but a little welding to the ends and they would go right in, I'm an idiot. For some reason I assumed these were pipes that brought the exhaust to the rear of the car, under the bumper, like some people add for looks and sound. | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Mon Feb 11, 2013 3:49 pm | |
| These "could" be made into those. Just have to get a straight tip and not the one that turns to the side, | |
|
| |
Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 1:15 pm | |
| If you still got the car, I need two wicked big ticket items.... ..... ... The two bolts for the horns! | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 3:35 pm | |
| Custom front clip, Im not sure if it even has horns... | |
|
| |
Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 3:38 pm | |
| - Ironfistdog wrote:
- Custom front clip, Im not sure if it even has horns...
Dang lol. Well, sedans have the same horns. But nbd, I can always pull my horns, go to ace and find bolts to match. | |
|
| |
96slowss
Posts : 855 Join date : 2010-06-09 Age : 35 Location : Halifax,MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 4:04 pm | |
| hows the tailgate?? and do the door panels have grab handles? or are they the short ones?? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 4:18 pm | |
| Tailgate is pretty straight. It's in primer grey, no tag light, studs and holes shaved/filled. The door panels have the leather pull straps. | |
|
| |
Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sat Feb 16, 2013 4:18 pm | |
| Roadmasters have different panels from Caprice/Impalas. Not sure if you were aware. | |
|
| |
96slowss
Posts : 855 Join date : 2010-06-09 Age : 35 Location : Halifax,MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Feb 17, 2013 12:59 pm | |
| how much for the tailgate? | |
|
| |
Ironfistdog
Posts : 2141 Join date : 2011-01-11 Age : 42 Location : Warren, MA
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! Sun Feb 17, 2013 2:21 pm | |
| Make a fair offer. | |
|
| |
Sponsored content
| Subject: Re: CALLING ALL VULTURES!!! RMW part out! | |
| |
|
| |
| CALLING ALL VULTURES!!! RMW part out! | |
|