Who is online? | In total there are 5 users online :: 0 Registered, 0 Hidden and 5 Guests None Most users ever online was 182 on Thu May 27, 2021 9:57 pm |
March 2024 | Mon | Tue | Wed | Thu | Fri | Sat | Sun |
---|
| | | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | Calendar |
|
| | **NEEDED** 1 9C1 AXLE... | |
| | Author | Message |
---|
laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: **NEEDED** 1 9C1 AXLE... Thu Sep 15, 2011 9:48 am | |
| like the title says.... went to Als last night to r&r outter seals and bearings. one side was leaking so figured id do both sides and the bearings. well... the side that had the leaky seal had a f'd bearing.... and.....yep you guessed it.... an f'd axle... yippeee. so hopin somebody has one hangin around they want to part with, cheap. ive already looked int new replacements and will go that route if i have to. but, this speed bump may have the car off the road til next year... so, hopin somebody can save the day... | |
| | | silverfox103
Posts : 1540 Join date : 2009-01-25 Age : 29 Location : Littleton, NH & St. Simons Island, GA
| Subject: Re: **NEEDED** 1 9C1 AXLE... Thu Sep 15, 2011 10:03 am | |
| Glen has got to have a few of those!
Tom C. | |
| | | Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: **NEEDED** 1 9C1 AXLE... Thu Sep 15, 2011 8:40 pm | |
| Ant,
I'm like 20 minutes from this JY. Call and ask for Mike. He's a nice guy
http://hartford.craigslist.org/pts/2600496026.html | |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 2:56 pm | |
| - Cadet57 wrote:
- Ant,
I'm like 20 minutes from this JY. Call and ask for Mike. He's a nice guy
http://hartford.craigslist.org/pts/2600496026.html thanks for the link Justin. called and talked to Mike, ive been to leveilles a million times. my brother lives like 10 mins away. he wanted to much for just the axle.. i think im going to get one from advance auto. i just have to confirm the axle length. they have a motive gear axle for $88. and i just got a coupon code from the last online purchase i made with them, i get $50 off $100 purchase. | |
| | | Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 3:26 pm | |
| - laidlow91 wrote:
- Cadet57 wrote:
- Ant,
I'm like 20 minutes from this JY. Call and ask for Mike. He's a nice guy
http://hartford.craigslist.org/pts/2600496026.html thanks for the link Justin. called and talked to Mike, ive been to leveilles a million times. my brother lives like 10 mins away. he wanted to much for just the axle... No probs. I could see his logic too. All that work for one little piece. Btw, I saved this info from when I was scoping parts for my rear end: Civi axle: 30-3/8" 9C1: 30-7/16" Wagon: 31-13/16" | |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 3:50 pm | |
| - Cadet57 wrote:
Civi axle: 30-3/8" 9C1: 30-7/16" Wagon: 31-13/16"
im pretty sure the 9c1 axle is 30-3/8" i threw a tape on it real quick when i got back from Als the other night and looked to be 30-3/8, gonna put a couple straight edges on the ends to get an exact measurement. not questioning your specs, but where did you get those measurements from??? i searched on the big board for a little while the other night and couldnt find any solid info, just a bunch of factory part #s, and cross referenced part #s, etc etc., all useless information to me. i can never understand why when it comes to information like this some body who has the measurements cant just post. 1 is xxx" 2 is xx" 3 is xxxx" etc. who really cares about old part #s, and new part #s for 50 different axles, from 10 different companies for 4 different width rears. you need to be a freakin rocket scientist to try and sift through pages and pages of crap. ok, im done ranting... | |
| | | Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 3:55 pm | |
| - laidlow91 wrote:
i threw a tape on it real quick when i got back from Als the other night and looked to be 30-3/8, gonna put a couple straight edges on the ends to get an exact measurement. not questioning your specs, but where did you get those measurements from???
Straight from Rock Auto. They have all three types and break them down as "Wagon" "Police", and "Sedan (not Police or Wagon)" DORMAN Part # 630118 More Information About this Part {#26014038, 26018079} Length: 31-13/16"; Number of Holes: 5; Spline: 30 Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; 30 Spline; WagonDORMAN Part # 630117 More Information About this Part {#26018080} Length: 30-7/16"; Number of Holes: 5; Spline: 30 Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/3.42R; Police; Limited Slip; Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/2.56R; Police; Exc. Limited Slip
AUTO UNLIMITED Part # 1858 5 lugs; 30 spline; 10 cover bolts; 8.5 ring gear; 30-3/8" length; Sold individually; Does Not Include Hardware REAR SEDAN DRUM (NOT POLICE OR WAGON); LEFT AND RIGHT | |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 4:19 pm | |
| - Cadet57 wrote:
Straight from Rock Auto. They have all three types and break them down as "Wagon" "Police", and "Sedan (not Police or Wagon)"
DORMAN Part # 630118 More Information About this Part {#26014038, 26018079} Length: 31-13/16"; Number of Holes: 5; Spline: 30 Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; 30 Spline; Wagon
DORMAN Part # 630117 More Information About this Part {#26018080} Length: 30-7/16"; Number of Holes: 5; Spline: 30 Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/3.42R; Police; Limited Slip; Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/2.56R; Police; Exc. Limited Slip
AUTO UNLIMITED Part # 1858 5 lugs; 30 spline; 10 cover bolts; 8.5 ring gear; 30-3/8" length; Sold individually; Does Not Include Hardware REAR SEDAN DRUM (NOT POLICE OR WAGON); LEFT AND RIGHT
but then how does this fit in with that info? thats the same part # u have listed for the 9c1 axle. i thought there was only 3 different 8.5 rears that came in b bodies? and then there was the 7.5 rear? 1996 CHEVROLET IMPALA SS 5.7L 350cid V8 MFI (P) OHV : Drivetrain : Axle Shaft Wiki Price DORMAN Part # 630117 More Information About this Part {#26018080} Length: 30-7/16"; Number of Holes: 5; Spline: 30 [Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] [Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] Includes Bearing, Seal, Studs and Lug Nuts; Rear Left; 8-1/2", 8-5/8" Dia Ring Gear; w/2.93R; w/Heavy Duty Brakes (JA2); Exc. Limited Slip [Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] [Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] Includes Bearing, Seal, Studs and Lug Nuts; Rear Left; 8-1/2", 8-5/8" Dia Ring Gear; w/3.23R; w/Heavy Duty Brakes (JA2) [Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] [Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/2.93R; w/Heavy Duty Brakes (JA2); Exc. Limited Slip [Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] [Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.] Includes Bearing, Seal, Studs and Lug Nuts; Rear Right; 8-1/2", 8-5/8" Dia Ring Gear; w/3.23R; w/Heavy Duty Brakes (JA2) | |
| | | Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 4:30 pm | |
| - laidlow91 wrote:
but then how does this fit in with that info? thats the same part # u have listed for the 9c1 axle. i thought there was only 3 different 8.5 rears that came in b bodies? and then there was the 7.5 rear?
That I don't know. All I know, unfortunately, is what I listed above. Those are the part numbers and lengths for a '93 Caprice. So maybe there is a difference between TBI and LT1 axles. | |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 4:33 pm | |
| im SOO confused..... im gonna go put a couple straight edges on the 9c1 axle ive got in the garage right now and report back my findings in a few mins. | |
| | | Cadet57
Posts : 4481 Join date : 2010-03-14 Age : 36 Location : Chicopee, MA
| | | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 4:56 pm | |
| - Cadet57 wrote:
You aren't alone. I knew there was a difference between Wagons and Sedans but who knew that difference would go to 9C1's, SS's and Civi cars, and between LT1's and TBI's.
Btw, if I added to the confusion, sorry about that, really thought giving you the lengths I had would help. didnt add to the confusion at all. i know for sure there are 3 different length axles. 1. 9c1 2. ss 3. wagon other then that i have no clue.. BUT, for the record.. on this the 16th day of september 2011. the length of a 96 9c1 axle. measured 2 different ways. 1. with a magnetic straight edge on the shaft end, measuring to the wheel mounting surface, starting at the 2" mark to eliminate any mis measurement from the tapes riveted end. 2. with a level across the shaft end, using the same error free way as measurement 1. (30-3/8") i may pull an axle out of the ss rear and measure that to.... | |
| | | Tomz9C1
Posts : 1498 Join date : 2009-01-21 Age : 61 Location : Rumford, Maine
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 6:31 pm | |
| Confusion ends here. http://www.impalassforum.com/vBulletin/showthread.php?t=237620&highlight=axle+lengths
02-06-2010, 09:00 PM Navy Lifer Senior Member Join Date: Nov 2000 Location: Canton GA Posts: 4,708 ---------------------------------------------------------------------------------- Chevy 91-92 sedan 1566mm - narrow (all)
93-96 sedan 1566mm - narrow (9C1 - disc & drum & some other drum applications) 1598mm - wide (Impala SS - disc & B4U - drum)
Buick 91-96 & Fleetwood 93-96 sedans 1566mm - narrow (all) NOTE: Fleetwood housing is unique to the application - 4-channel ABS provisions
91-96 wagon, all 1642.5mm
All 93-96 7.625" (ring gear) housings are 1598mm wide (Chevy sedan only)
Sedan housings, in both widths, have the same lower control arm bracket location/spread distance, and will fit any other sedan frame. Wagons have a wider spread distance (approx. 2") between lower control arm brackets on housing, and corresponding wider frame lower control arm mounts.
8.5" axle shaft information - sedans only __________________ Bill Harper ISSCA #127 inov8r@windstream.net
-------------------------------------------------------------------------------- Last edited by Navy Lifer; 07-18-2010 at 11:09 PM.
| |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 7:15 pm | |
| - Tomz9C1 wrote:
- Confusion ends here.
yes and no... that clears up that there are only 3 different width rears in b bodies. but, doesnt help with the length of the axles them selfs. and so if this info is true, there are axles from various manufacturers that vary in length up to an 1/8", some being 1/16th". im by no means an axle expert, but is there enough play to allow an axle that is 30-1/2" to work in rear that came with a 30-3/8" axle?? and just one more rant... why the hell is everybody always post measurements up in millimeters??? where do i buy a mm tape measure?? and yes i know how to convert from one to the other, theres even a convertor on my phone..its just f'n stupid... so why not just give a standard measurement??? end rant... none of this directed toward you Tom. thanks for joining the discussion. | |
| | | boojum
Posts : 2182 Join date : 2009-01-21 Age : 36 Location : NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 7:59 pm | |
| Advance has all sorts of coupon codes. I got a $200 AC compressor for $150 using my secret code.
| |
| | | laidlow91
Posts : 552 Join date : 2009-01-23 Age : 46 Location : New Boston, NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Fri Sep 16, 2011 8:11 pm | |
| - boojum wrote:
- Advance has all sorts of coupon codes. I got a $200 AC compressor for $150 using my secret code.
yeah they do have some pretty good deals online. the code i have now i earned by using a code last month. and the best thing is you dont have to deal with the dope behind the counter. | |
| | | boojum
Posts : 2182 Join date : 2009-01-21 Age : 36 Location : NH
| Subject: Re: **NEEDED** 1 9C1 AXLE... Sun Sep 18, 2011 10:14 pm | |
| No help with the axle but ... I needed two Moog tie rods today, $51 for the pair. So instead I used a code and got three for $47. I'll buy the fourth sometime later to meet a minimum to use a code. | |
| | | Sponsored content
| Subject: Re: **NEEDED** 1 9C1 AXLE... | |
| |
| | | | **NEEDED** 1 9C1 AXLE... | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |